, Lighting installation, lamp installation Note:
1, the most basic requirements for installation are to be fixed.
2, indoor installation wall lamps, bedside lamps, table lamps, floor lamps, mirror lamp when the lamp, a height of less than 24m and below, lamps and metal casing should be grounded to ensure safe use.
3, bathroom and kitchen equipment when Bantam lamp, ceramic screw short leg lamp should be used. Screw base, wiring, phase line (switch wire) should be connected in the Center contact on the Terminal, on the zero line connected to the screw terminal.
4, table lamps, lamp with switch for safety, there should be no exposed metal parts of the handle at the beginning.
5 when you install various types of lamps, decorative suspended roof, requirements should follow the installation instructions to install it. Light weight is greater than 3kg should be using embedded hooks or hangers are secured with bolts directly through the roof installation (not with a suspended roof lifting keel bracket lamps). Drawn from the lamp box box wire hose protection is applied to the lamp position and prevent the wires exposed in the flat.
6, ceiling or wall panels of dark lines must have fire-retardant casing.
Second, the installation of special lighting
Household lamps mainly modeling smallpox some special installation place, many people like a concealed light diffusers, but not everybody can be installed. Skills:
1, tail. Fluorescent lamps to a root by root to install. Because they do not often use diffuse light, so don't hurt.
2, tube top and form broad box side of the ceiling at the same level.
3, there is an arc of small pipes that are available (fluorescent lamps), not a big something.
4, light colors available in white, yellow, and blue (or purple). Don't use other color, particularly red and green. Bracket lamps). Drawn from the lamp box box wire hose protection is applied to the lamp position and prevent the wires exposed in the flat.
6, ceiling or wall panels of dark lines must have fire-retardant casing. BACK